Drain Cleaning & Hydro-Jetting Services
A drain that runs slowly or backs up is usually the result of buildup that has been accumulating for months or years. This page explains what causes clogs, how hydro jetting clears them, and what to expect during a professional drain cleaning service.
Signs Your Drains Need Cleaning
-
Slow draining water: Water pools before going down, meaning buildup has narrowed the pipe.
-
Recurring clogs: Drains that clog again within weeks still have buildup on the pipe walls. Snaking only opens a narrow channel.
-
Gurgling or bubbling: Gurgling fixtures or bubbles in the toilet mean a partial main line blockage is forcing air back through the water seals.
-
Complete blockages: Water won’t drain at all. Act quickly to prevent overflow.
A single slow fixture is typically a local clog. If several drains are affected at once, the problem may be further down the line. See our Camera Inspection page for how hidden causes are identified.
a hydrojetter being used to clear a line
Old pipe with heavy mineral buildup
Tree root intrusion at joints, then expand and block or break the pipe.
What Causes Drain Clogs
Most clogs start with grease, soap scum, or minerals building up on pipe walls, like plaque in arteries. The pipe still holds water, but flow is restricted. Eventually, hair or food waste snags on the layer and causes a total blockage.
In underground lines, tree roots make it worse. They enter through tiny cracks or loose fittings, then grow into a mesh that traps debris.
Because roots keep regrowing, they often need physical removal or pipe repair, not just cleaning.
How Hydro Jetting Works
Hydro jetting uses high-pressure water (up to 4,000 PSI) to clear pipes without cables or chemicals. A specialized nozzle breaks up blockages and scours the pipe walls, flushing out everything from grease to root mesh.
Because it cleans the full circumference of the pipe, jetting removes both the clog and the buildup, restoring original capacity. It’s the best choice for recurring clogs.
However, it doesn’t seal the cracks roots enter through, so they will eventually regrow. Fixing the entry point requires repair, as covered on our Sewer Line Repair page.
A hardened blockage of grease and minerals
Keeping Drains Clear Between Cleanings
-
Wipe grease and oil from pans into the trash instead of rinsing it down the drain.
-
Use drain strainers in showers and sinks to catch hair and food particles.
-
Avoid flushing wipes, even those labeled “flushable. ”